Connecting the psr1400-a – H3C Technologies H3C S7500E Series Switches User Manual
Page 40
Advertising
30
Figure 23 Connecting the power cord
Connecting the PSR1400-A
1.
Unpack the power cord, and verify the power cord model (the PSR1400-A uses a 16 A AC power
cord).
2.
Use a Phillips screwdriver to remove the screws from the power cord retainer suite and remove the
right part of the retainer suite.
3.
Connect the power cord to the power socket on the power module, and ensure a good contact.
4.
Fasten the right part of the power cord retainer to lock the power cord.
5.
Connect the other end of the power cord to the AC power socket.
Advertising