Optical fiber, Optical fiber cable, Patch cord – H3C Technologies H3C S7500E Series Switches User Manual

Page 141

Advertising
background image

131

4.

Cut the top of the wires even with one another. Insert the wires into the RJ-45 end and make sure

the wires extend to the front of the RJ-45 end and make good contact with the metal contacts in the
RJ-45 end and in the correct order.

5.

Crimp the RJ-45 connector with the crimping plier until you hear a click.

6.

Repeat the above steps with the other end of the cable.

7.

Use a cable tester to verify the connectivity of the cable.

Optical fiber

CAUTION:

Use the same types of transceiver modules, pigtail cords, patch cords, and fiber cables. If you use
single-mode optical fibers, the transceiver modules, pigtail cords, patch cords, and fiber cables must be
single-mode.

Optical fiber

Optical fibers are widely used in fiber-optic communications, which are advantageous for long-distance

communications.
Optical fibers can be classified into the following types:

Single mode fiber—It has a core size of 10 μm, and has a lower modal dispersion. It carries only

a single ray of light. It is mostly used for communication over longer distances.

Multi-mode fiber—It has a core size of 50 μm or 62.5 μm or higher, and has a higher modal
dispersion than single-mode optical fiber. It is mostly used for communication over shorter

distances.

Table 84 Allowed maximum tensile force and crush load

Period of force

Tensile load (N)

Crush load (N/mm)

Short period

150

500

Long term

80

100

Optical fiber cable

An optical fiber cable is a cable containing one or more optical fibers. The optical fiber elements are
typically individually coated with plastic layers and contained in a protective tube. Optical fiber cables

fall into single-mode and multi-mode.

Patch cord

A fiber that has connectors at both ends is called a patch cord. A patch cord connects one optical device

to another for signal routing. Patch cords fall into single-mode and multi-mode patch cords.

Single-mode patch cord—The jacket is yellow. It permits transmission over longer distances.

Multi-mode patch cord—The jacket is orange. It permits transmission over shorter distances.

Advertising