H3C Technologies H3C S7500E Series Switches - Manual (Page 19)

9
NOTE:
Figures for the mounting bracket, cable management bracket, and power cord management bracket
in
Table 5 are for illustration only.
Tools and equipment
Prepare the following tools and equipment yourself:
• Mechanical lift.
• Phillips screwdrivers P1–100 mm, P2–150 mm, and P3–250 mm.
• Flat-blade screwdriver P4–75 mm.
• Marker.
• Tape.
• Diagonal pliers, wire-stripping pliers, and wire clippers.
• M6 wrench.
• Cables such as network cables and fiber cables.
• Meters and equipment, such as hub and multimeter.
• Configuration terminal, such as PC.
NOTE:
The rack installation accessories and tools vary by rack model and are not included in this section. For
more information, see the installation guide for the rack.