H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 13)

4-1
z The models listed in this document are not applicable to all regions. Please consult your local sales
office for the models applicable to your region.
z Support of the H3C WA series WLAN access points (APs) for features may vary by AP model. For
more information, see Feature Matrix.
z The interface types and the number of interfaces vary by AP model.
z The term AP in this document refers to common APs, wireless bridges, or mesh APs.
4
WLAN Interface Configuration
This chapter includes these sections:
z Overview
z WLAN-Radio Interface
z WLAN-BSS Interface
z WLAN Mesh Interface
z WLAN Mesh Link Interface
z Displaying and Maintaining a WLAN Interface
Overview
FAT APs support WLAN-Radio physical interfaces and WLAN-BSS virtual interfaces. WLAN-Radio
interfaces can be bound to WLAN-BSS interfaces to provide wireless network access.
WLAN-Radio Interface
Introduction
WLAN-Radio interfaces are physical interfaces and are used for providing wireless access service.
They can be configured but cannot be removed.
Configuring a WLAN-Radio Interface
Follow these steps to configure a WLAN-Radio interface:
To do… Use the Command… Remarks
Enter system view system-view —
Enter WLAN-Radio interface view
interface wlan-radio
interface-number
Required