1x authentication configuration example, Network requirements, Configuration procedure – H3C Technologies H3C WA2600 Series WLAN Access Points User Manual
Page 31: 1x authentication configuration example -16
5-16
z
Add an account and password 00146c8a43ff.
z
Select the service mac.
Figure 5-7 Add account
3) Verify the configuration
z
After the client passes the MAC-and-PSK authentication, the client can associate with the AP and
access the WLAN.
z
You can use the display wlan client command, display connection command and display
mac-authentication command to view the online clients.
802.1X Authentication Configuration Example
Network requirements
z
As shown in
, an AC with IP address 10.18.1.1, an AP and a RADIUS server with IP
address 10.18.1.88 are connected through a Layer 2 switch.
z
It is required to perform 802.1X authentication on the client.
Figure 5-8 802.1X authentication configuration
Configuration procedure
1) Configure the fat AP
# Enable port security, and set the authentication method of the 802.1X user to eap.
<AP> system-view
[AP] port-security enable