H3C Technologies H3C WA2600 Series WLAN Access Points User Manual
Page 33
5-18
2) Configure the RADIUS server (iMC)
The following takes the iMC (the iMC versions are iMC PLAT 3.20-R2602 and iMC UAM 3.60-E6102)
as an example to illustrate the basic configurations of the RADIUS server.
# Add access device.
Log in to the iMC management platform. Select the Service tab, and then select Access Service >
Access Device from the navigation tree to enter the access device configuration page. Click Add on
the page to enter the configuration page shown in
:
z
Add 12345678 for Shared Key.
z
Add ports 1812, and 1813 for Authentication Port and Accounting Port respectively.
z
Select LAN Access Service for Service Type.
z
Select H3C for Access Device Type.
z
Select or manually add an access device with the IP address 10.18.1.1.
Figure 5-9 Add access device
# Add service.
Select the Service tab, and then select Access Service > Service Configuration from the navigation
tree to enter the add service page. Then click Add on the page to enter the configuration page shown in
.
z
Set the service name to dot1x.
z
Select EAP-PEAP AuthN from the Certificate Type drop-down list, and MS-CHAPV2 AuthN from
the Certificate Sub-Type drop-down list.