H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 35)

5-20
Double click the icon at the bottom right corner of your desktop. The Wireless Network
Connection Status window appears. Click the Properties button in the General tab. The Wireless
Network Connection Properties window appears. In the Wireless Networks tab, select wireless
network with the SSID dot1x, and then click Properties. The dot1x Properties window appears. Then,
in the Authentication tab, select Protected EAP (PEAP) from the EAP type drop-down list, and click
Properties. In the popup window, clear Validate server certificate, and click Configure. In the popup
dialog box, clear Automatically use my Windows logon name and password (and domain if any).
The configuration procedure is as shown in Figure 5-12 through Figure 5-14 .