H3C Technologies H3C Intelligent Management Center - Manual (Page 23)

16
Figure 5 Batch deploy succeeded
6. Perform either of the following operations:
{
To start IMC immediately, select Start IMC Server now and click OK.
{
To start IMC later, clear the Start IMC Server now option and click OK. Then, when you are
ready to start IMC, click Start IMC on the Monitor tab of the Intelligent Deployment Monitoring
Agent.
In this example, select Start IMC Server now and click OK. The Deploy tab displays the component
deployment status, as shown in
Figure 6 .
Figure 6 Information about component deployment