Installing and deploying ead – H3C Technologies H3C Intelligent Management Center User Manual
Page 53
46
18.
Click Deploy.
After the deployment is complete, the Batch deploy succeeded window appears, as shown
in
Figure 42 Batch deploy succeeded
19.
Perform either of the following operations:
{
To start IMC immediately, select Start IMC Server now and click OK.
{
To start IMC later, clear the Start IMC Server now option and click OK. Then, when you are
ready to start IMC, click Start IMC on the Monitor tab of the Intelligent Deployment Monitoring
Agent.
Installing and deploying EAD
EAD depends on UAM to function. Before you install EAD, make sure UAM is installed and deployed.
EAD includes the following subcomponents:
•
Security Policy Configuration
•
Desktop Asset Manager
•
Desktop Asset Manager Proxy Server
To install and deploy EAD:
1.
Install EAD in the same way NTA is installed. (Details not shown.)
For information about the installation procedures, see "
."
2.
In the Installation Completed window (see
), select Open deployment monitoring agent.