H3C Technologies H3C Intelligent Management Center - Manual (Page 32)

25
Figure 18 Configure Web Service Port
6. Set the HTTP port and HTTPS port.
The default is 8080 and 8443. Make sure the specified ports are open in the firewall settings and
are not being used by other services. If UAM is to be installed for the IMC system, set HTTP Port to
80. You cannot change the HTTP port number after IMC installation is completed. To change the
HTTP port number, you must reinstall IMC.
7. Click Deploy.
The Deploying window appears, as shown in
Figure 19 .
The system starts to install the embedded database and deploy subcomponents. Automatic
database installation might take a while.