Deploying nta – H3C Technologies H3C Intelligent Management Center User Manual
Page 44
Advertising
37
After the installation is complete, the Installation Completed window appears, as shown in
.
Figure 30 Installation Completed
11.
Perform either of the following operations:
{
To start to deploy IMC NTA, select Open deployment monitoring agent.
{
To continue to install other IMC components, select Install other IMC Components.
In this example, select Open deployment monitoring agent.
12.
Click Finish.
Deploying NTA
1.
In the Installation Completed window (see
), select Open deployment monitoring agent
and click Finish.
The system automatically starts the Intelligent Deployment Monitoring Agent. A Batch deploy
window appears at the same time, as shown in
.
Advertising