H3C Technologies H3C Intelligent Management Center - Manual (Page 45)

38
Figure 31 Batch deploy
2. Select the components you want to deploy. In this example, select all the NTA subcomponents.
3. Click OK to start deploying the components.
After the deployment is complete, the Batch deploy succeeded window appears, as shown
in
Figure 32 .
Figure 32 Batch deploy succeeded
4. Perform either of the following operations:
{
To start IMC immediately, select Start IMC Server now and click OK.
{
To start IMC later, clear the Start IMC Server now option and click OK. Then, when you are
ready to start IMC, click Start IMC on the Monitor tab of the Intelligent Deployment Monitoring
Agent.