Grass Valley iControl V.4.43 - Manual (Page 469)

iControl
User Guide
459
To enable iControl to run a custom SNMP driver
1. In iC Navigator, double-click on a GSM to open its Alarm Browser window.
2. In the Create new alarm provider list, select SNMP - Generic manager, and then click
New.
Figure 8-31
The SNMP Manager window appears.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• There is an active connection between the iControl Application Server and the SNMP
device.
• You have opened iControl (see page 696 ).
• You have opened iC Navigator (see page 719 ).