Grass Valley iControl V.4.43 - Manual (Page 87)

iControl
User Guide
77
Figure 2-51: RocketPort 8-port serial breakout box
Configuring Serial Ports for a Specific Application Server
To configure serial ports for an Application Server
1. On iControl’s Webmin page, click Miranda iControl Management Tool.
The Miranda Setup page appears.
2. Click the icon beside iControl services monitoring and configuration tool.
Figure 2-52
Note: The numbers stamped into the breakout box case (if any) do not correspond
to the port number.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You are logged on to iControl Webmin (see page 701 ).
ttyR4 (COM 7)
ttyR5 (COM 8)
ttyR6 (COM 9)
ttyR7 (COM 10)
ttyR0 (COM 3)
ttyR1 (COM 4)
ttyR2 (COM 5)
ttyR3 (COM 6)