Grass Valley iControl V.4.43 User Manual

Page 564

Advertising
background image

Fingerprint Comparison and Analysis

GSM Alarm Browser—Lip-Sync Detection Alarms

554

Lip-sync delay
(last valid)

YES

NO

NO

Normal

Last valid measurement (in milliseconds), which is
held/latched when one of the sources is interrupted.

Critical

Critical if lip-sync delay is beyond audio-lead and audio-lag
thresholds.

Unknown

This can arise for either of two possible reasons:

• There is no fingerprint data available for analysis

(e.g. fingerprint presence error, comparison just started).

• The audio or video match level is too low for computing the

lip-sync (e.g. audio silence, low motion video, unlocked
audio/video)

Silent audio

YES

NO

YES

Normal

Indicates that the audio is not silent and contains enough
variation for a proper matching between the Reference and the
Probed signal(s).

Critical

Critical when the audio signal is silent or has a very low
amplitude for more than five seconds.

Unknown

This can arise for either of two possible reasons:

• There is no fingerprint data available for analysis

(e.g. fingerprint presence error, comparison just started).

• The audio or video match level is too low for computing the

lip sync (e.g. audio silence, low motion video, unlocked
audio/video).

Fingerprint
presence

YES

YES

YES

Normal

Indicates that fingerprints have been received within the last
five seconds by the analyzer service from the Densité card
marked as Probed.

Critical

Critical when no fingerprints have been received by the
analyzer service from the Densite card marked as Probed.

Low- motion
video

YES

YES

NO

Normal

Indicates that the video contains enough motion for a proper
matching between the Reference and the Probed signal(s).

Critical

Critical when video signal is black or frozen, or with very little
movement for longer than five seconds.

Unknown

This can arise for either of two possible reasons:

• There is no fingerprint data available for analysis

(e.g. fingerprint presence error, comparison just started).

• The audio or video match level is too low for computing the

lip sync (e.g. audio silence, low motion video, unlocked
audio/video).

Fingerprint analysis alarms (Continued)

Alarm name

Applicability (based on

comparison mode)

Alarm

state

Description

Lipsync

detect

Video

comp

Audio

comp

Advertising