Toshiba DynaPad WT12PE-A64 - Manual (Page 137)

137 If Something Goes Wrong
Connecting to the Internet
Using a wireless connection
After you have an ISP and you've connected your hardware
by following the ISP's instructions, you might already be
connected to the Internet. To find out, open your Web
browser and try visiting a Web site. If the Web site doesn't
appear, try connecting to a network.
Click or touch the Network ( ) icon on the taskbar. Click or
touch the network you wish to connect to, and then click or
touch
Connect .
Troubleshooting an Internet connection – Verify
network status
The appearance of the Network ( ) icon in the taskbar
indicates the following conditions:
The network connection is set to wireless and you are
connected to a wireless access point.
Check with your ISP for network difficulties.
The network connection is set to wireless and you are
connected to a wireless access point, but have no
Internet connectivity.
Check with your ISP for network difficulties.
The network connection is set to wireless and you are
NOT connected to a wireless access point.
Check your home router and try moving your device
closer to the wireless access point.
You are connected using a wired connection.
Check your modem and ISP for difficulties.
The network connection is set to Airplane mode.
Toggle Airplane mode using the ( ) key or toggle
the on-screen Airplane mode switch located
under Networks.
The wireless network adapter is disabled.
Double-click or touch the Network icon and set
Wi-Fi to On.