Toshiba DynaPad WT12PE-A64 - Manual (Page 69)

69 Mobile Computing
Charging the main battery
The RTC battery powers the RTC memory that stores your
system configuration settings and the current time and date
information. It maintains this information for up to a month
while the device is turned off.
TECHNICAL NOTE: Depending on your system, the RTC
battery may only charge while the device is turned on.
Power management
Your device ships with the power management options
preset to a configuration that will provide the most stable
operating environment and optimum system performance for
both AC power and battery modes.
Changes to these settings may result in system
performance or stability issues. Users who are not
completely familiar with the power management
component of the system should use the preset
configuration. For assistance with setup changes,
contact Toshiba’s Customer Support Center.
Charging the main battery
If the device is leaking or its case is cracked, put on
protective gloves to handle it.
The battery needs to be charged before you can use it to
power the device.
Always use the Micro USB/AC adaptor specified by
Toshiba. You can order a Toshiba Micro USB/AC adaptor
from Toshiba’s Web site at
accessories.toshiba.com .
Your device’s battery is not accessible to the user.
Battery charge time may vary depending on the
applications, power management settings, and features
used.
NOTE
NOTE