Riello UPS PowerShield³ - Manual (Page 11)

UPSMON User Manual Simple UPSMON Configuration (Wizard) • 11
IV. Simple UPSMON Configuration (Wizard)
The basic configuration of UPSMON (WINDOWS or JAVA version) is performed using the Wizsetup program; this will enable correct
communication with the UPS and setup of the main software operational parameters.
ATTENTION: Bad parameters or undesirable manual changes of the upsmon.ini file may cause incorrect operation of the
UPSMON software, primarily the Upsagent module.
1. Wizsetup for Windows
ATTENTION: If the Wizsetup program is started for first time, the software will require a PRTK code, therefore when prompted
enter the correct PRTK code for the UPS to be monitored, this code is located on a label which can be found on either the front
or the rear of the UPS, and failure to input this code will prevent the operation of UPSMON.
ATTENTION: Administrative rights are required when saving the configuration using Windows NT, 2000 Xp, 2003.
The basic configuration of UPSMON performed using the Wizsetup program is due in three step. Is possible to open the configuration
complete program Upsetup by clicking the button with the caption Upsetup.
1. Welcome page: in this page is possible to select the language of UPSMON.