Riello UPS PowerShield³ - Manual (Page 41)

UPSMON User Manual Advanced UPSMON Configuration • 41
UDP Port
The UDP communication port. This must be same on all system using
UPSMON.
33000
Ignore remote UPS commands
Enables or disables access from remote computers to make
commands to the UPS(by Upsagent or Upsview). This feature is used
to prevent a remote user from forcing a command to the UPS, such as
UPS shutdown or test etc.
Disabled
HTTP enabled Allow the support for HTTP. Disabled
HTTP path
Used to specify where the Upsagent creates the files with the UPS
status for HTTP monitoring.
Empty
Password protection
If selected the software will require a password for communication
with the UPS. This password is to protect the Upsagent connection. If
the user doesn’t know the password, it will not be possible to connect
the agent.
Disabled
2.2 UPS Configuration
The UPS connection window contains the list of the UPS that will be monitored by the Upsagent.
It is possible to add, delete or edit the UPS list.
The STANDARD version of UPSMON will only allow one UPS to be monitored either locally or via a network by the Upsagent. The
FULL version will allow one UPS to be monitored locally and up to 15 UPS to be monitored via a network by the Upsagent. To change
the STANDARD version to the FULL version you must enter the CDROM serial number and relevant License number using the About
tab and the enter code dialog box. The License number is available from the UPS manufacturer or supplier.
The FULL version of UPSMON also enables the operation of Parallel functionality. This function enables the setup of groups of UPS,
which are working in redundant operation. It is possible to create up to 10 groups, with each group containing up to 8 UPS (2 UPS
minimum) with up to 64 event actions. To enable this function the user must define at least 2 Ups.