Riello UPS PowerShield³ - Manual (Page 71)

UPSMON User Manual Uninstallation of the UPSMON • 71
2.2.8 Data log
The data log list displays logged measured parameters from the UPS such as the input voltage, battery voltage, capacity, runtime and
output load. All of the information contains the date, time, device name and measured values. To use data log you must configure it in
the Upsetup module.
The data logged can be used by other programs, for example if you need to generate a graphic view. The data is logged into a standard
text file, which may be simply imported into other programs.
2.2.9 Functions
It is possible to execute commands on the local UPS. A list of these commands is dependent on the UPS type, but the UPS shutdown
and reboot command is supported by all UPS types.
For some UPS types it is possible to start UPS internal tests or a UPS battery test.