Riello UPS PowerShield³ - Manual (Page 5)

UPSMON User Manual What is UPSMON • 5
I. What is UPSMON?
The UPSMON software package is a client/server-application for networks and local workstations used for monitoring UPS systems. The
server-module of the UPSMON Software is the Upsagent, this communicates via an RS-232 or TCP/IP network cable with the UPS.
When the Upsagent is operating it collects (as a background program) the messages sent from the UPS. The Upsagent interprets the
received messages and makes them available to the client-module, which is known as Upsview. The communication of the data between
the Upsagent and the Upsview can be done either via TCP/IP or shared memory on a local computer.
If the Upsagent detects mains supply voltage variations or even a total power loss, it can execute various command scripts, which for example may
either perform a shutdown of the server or send warnings to the connected users. These scripts which are a part of the UPSMON package can be
adapted to suit your specific requirements. When a change in the UPS alarm-status is detected, there is a corresponding file (i.e. shell
script/command file) that will be executed either when the alarm is activated or deactivated. If an alarm condition remains for a long duration, the
user can customise the system to shutdown.
The user may also prompt the UPS to shutdown to save autonomy time, which allows the system adequate time to enable further shutdowns in the
unfortunate event of a repetitive alarm condition.
The configuration of the UPSMON package (primarily used for the Upsagent), is performed using the Upsetup module.
The Upsview module is used for operating and monitoring the active Upsagent module that is connected to the UPS. It is possible to
check the status of the UPS using various views, for example block diagram or alarm tables. The Upsview can be used to constantly
monitor and evaluate the event file (log file) which is permanently updated with the changing status of the UPS by the Upsagent.