RIGOL DM3058 - Manual (Page 100)

RIGOL
User’s Guide for DM3058/DM3058E 3-2
Example 1: Reading Statistic Functions
How to realize the statistic function of maximum value for readings during
measuring.
During the maximum value statistic calculation, the first reading is taken as the
maximum value and being shown on the display. It will be refreshed to new
maximum value sub sequentially.
Operating Steps:
1. Press button, select AC Voltage measurement function. Choose an
appropriate measurement range.
2. Connect test leads as Figure 2-8.
3. Set the Statistic measurement function parameters.
4. Press
 Stats  MAX ON to statistic maximum value from the
measurement result.
5. Lead test leads into the circuit and start to measure.
As shown below, current Statistic State is “MAX” and current reading is the
maximum of all. See the figures below, the maximum value will refresh with
sample counts.
Figure 3-1 Statistic Maximum