Single triggering, Single triggering -54 – RIGOL DM3058 User Manual
Page 76
Advertising
RIGOL
User’s Guide for DM3058/DM3058E
2-54
Single Triggering
The multimeter takes one reading, or a number of readings specified by a sample
count you enter, each time press
.
Press
Single to enter into the following interface. Then Input needed sample
counts by Direction keys. After setting please press Done to open Single Trigger, at
this time Done is hiding and
is lighten.
Figure 2-69 Settings of sample count
Sample Count
Sample Count indicates the count of point sampled while the instrument
getting a signal of Single Trigger.
The range of sampling point should be between 1 and 2000.
The default of Sample Count is 1.
Advertising