RIGOL DM3058 - Manual (Page 68)

RIGOL
User’s Guide for DM3058/DM3058E 2-46
P/F Measurement
P/F function is available to prompt signals beyond ranges according to the upper
and lower parameters. Following are some measurement functions which are able
to do limit operation: DC Voltage, AC Voltage, DC current, AC current, Resistance,
Frequency, Capacitance and Sensor.
Press  P/F, the display shows:
Figure 2-62 P/F Setting
Table 2-17 P/F Measurement Menu Function Description
1. Set P/F
Select High or Low, and then switch to the needed digit by Left or Right
Direction keys and input numerical value by Up and Down Direction keys. Use
Left key to pitch on symbol on the left side when setting Positive or Negative
and switch them by Up and Down Direction keys.
2. Unit
The unit of P/F is decided by the current measurement function.
3. Over P/F hint
When the readings exceed selected upper limit, the vice-scream will show “HI
FAIL”.
Function Menu Settings Description
High Set the desired Upper limit.
Low Set the desired Lower limit.
ON
Open P/F Measurement, Status bar shows
“P/F”.
Save all changes, back to a higher level
menu.