RIGOL DM3058 - Manual (Page 107)

RIGOL
User’s Guide for DM3058/DM3058E 3-9
Figure 3-20 first group of reference value
6. Press Add button, input the second group of reference value:2V, 2℃.
Figure 3-21
Input the second group of reference value
7. Press Done to save data, getting two groups of reference values.
Figure 3-22 Edit interface of reference value
It allows deleting and editing the reference values that had been entered, select
the group of reference value then press Del or Edit to perform the operations
required. When you finish inputting all the data, press
and save all the
changes, back to a higher level menu.
8. Press
 Done to finish sensor file edit and enter the save and apply
interface.
Figure 3-23 Finish interface
9. Press Save to load Sensor’s file has been saved to the Memory of
DM3058/DM3058E. For the details please refer to Storage and Recall.
Select Apply to load settings into current Sensor and use it directly.