I/o settings, I/o settings -62 – RIGOL DM3058 User Manual
Page 84
Advertising
RIGOL
User’s Guide for DM3058/DM3058E
2-62
I/O Settings
Press
I/O, the display shows:
Figure 2-78 Interface Setting
Table 2-28 I/O Setting Function Menu Description
Function Menu Settings
Description
LAN
*
Set up LAN interface.
GPIB
*
Set up GPIB I/O interface. The bound
of value is 0~30.
USB
Check USB interface ID.
RS232
Set up RS-232 I/O interface.
Save all changes, back to a higher
level menu.
Operation introduction:
Remote control through GPIB (IEEE-488)
*
, USB, RS-232 or LAN
*
interface can be configured.
Each time, only one of the GPIB, USB and RS-232 interfaces can be
enabled.
Note
*
: only for DM3058.
Advertising