PLANET ICF-1600 - Manual (Page 40)

Press up / down key to enable / disable call forwarding. If you select “Enable”, you’ll be prompted to
enter target phone number. Press “Save” after your choice is made, and you can press “Delete” to
remove a number you entered, or press “Cancel” to abort and back to previous menu.
For no answer forwarding, default ringing timeout setting is 30 seconds, which means if no one answer
the call within 30 seconds, no answer forwarding function will be activated. You can change this setting
by following procedures:
Press “Main Menu” key to enter main menu, then use up / down key and OK key to go “Setting” ->
“Phone Settings” -> “Ringing Timeout”, then press “OK” key.
Please press “Delete” key to remove numbers, and input a new timeout setting by numeric keypad,
then press “Save” key to save changes.
40
Auto Call Rejection (DND Function)
If you don’t want to accept call because of certain reason, you can activate Auto Call Rejection (DND)
function: This function rejects all incoming call automatically, remote party will think your phone line is
busy. You will not be able to accept any incoming phone call in this mode.
To activate DND function, please follow the following instructions:
Phone Settings
Cancel Save
Ringing Time Out
Sec
Delete
Phone Settings
Call Waiting
Cancel
Enable
Disable
Select
03:00 01/01/2008 PLANET 1101
03:00 01/01/2008 PLANET 1101