Roland V-1HD+ Compact 4 x HDMI Video Switcher & UVC-01 USB Capture Device Kit - Manual (Page 13)

13
Basic Operation
Saving/Recalling Settings (Memory)
You can take the current settings, including video and audio settings and the state of the operation panel, and
save them as a single set in the V-1HD’s internal memory, for later recall and use when needed. The V-1HD is
provided with eight memories.
Settings saved in memory
What you can save in memory are the MEMORY
menu and AUDIO menu settings and the state of
the operation panel.
Each uses a different method for saving its values in
memory.
MEMORY menu/AUDIO menu settings
<Procedure for Saving>
Values are saved in memory when you quit each
menu (p. 12).
State of the operation panel
State of the [OUTPUT FADE] knob
State of the [EFFECTS A] and [EFFECTS B] knobs
On/off status of the EFFECTS A and EFFECTS B [ON] buttons
[A-1] through [A-4] button selection
[B-1] through [B-4] button selection
On/off status of the [BPM SYNC] button
[MIX], [WIPE] and [CUT] button selection
State of the A/B fader
<Procedure for saving>
Turn on the memory function (lighted) and save
the state of the operation panel in memory.
For more information on how to do this, refer to
“Saving the State of the Operation Panel” on this
page.
MEMO
5 SETUP menu items are not saved in memory. Only a
single set is saved in the unit.
5 You can recall settings at a specified memory number
at startup. Press and hold the [(TAP) BPM] button g use
“POWER ON LOAD” at the SETUP menu to specify the
memory number you want to recall.
NOTE
To update the state of the operation panel when
recalling a memory
By default, the state of the operation panel is not
updated when you recall a memory.
To update the state of the operation panel, press and
hold the [(TAP) BPM] button g at the SETUP menu, set
“MEMORY PANEL LOAD” to “ON.”
Saving the state of the operation panel
This saves the state of the operation panel, including
button and knob settings, in memory.
1.
Press the [MEMORY] button to turn on the
memory function (lighted).
At this time the [A-1] through [A-4] and [B-1]
through [B-4] buttons function as memory
selection buttons 1 through 8.
The currently selected button lights up in blue.
2.
Press and hold the [A-1] through [A-4] or [B-1]
through [B-4] button for the memory number
where you want to save the settings.
Memory number
1–4
5–8
The [A-1] through [A-4] and [B-1] through [B-4]
buttons all briefly light up in blue, and the
current settings are saved.
3.
To turn off the memory function, press the
[MEMORY] button again.
Recalling a memory
1.
Press the [MEMORY] button to turn on the
memory function (lighted).
2.
Press the [A-1] through [A-4] or [B-1] through
[B-4] button for the memory number you want
to recall.
The settings are recalled. The currently selected
button lights up in blue.
3.
To turn off the memory function, press the
[MEMORY] button again.