Roland V-1HD+ Compact 4 x HDMI Video Switcher & UVC-01 USB Capture Device Kit - Manual (Page 33)

33
Appendices
Menu item Value (bold text: default value) Explanation
REVERB LEVEL 0 –127
Adjusts the return level from reverb of the audio. A setting of “0”
results in no reverb applied.
REVERB TIME 0.0– 1.0 –5.0sec Adjusts the length of the reverb.
REVERB TYPE
Specifies the type of reverb.
ROOM Produces the natural-sounding reverberation of a room.
HALL
Produces the reverberation that is typical of a performance in a
concert hall.
MASTERING ON, OFF Turns the mastering on/off.
MASTERING NS 0 –127 Adjusts the degree of application of the noise suppressor.
MASTERING ENHANCER 0 –127 Adjusts the degree of application of the enhancer.
MASTERING Hi 0 –127
Suppresses high-frequency distortion and adjusts the sound to have
sustained tones.
MASTERING Mid 0 –127
Suppresses midrange distortion and adjusts the sound to have
distinct tones.
MASTERING Lo 0 –127
Suppresses low-frequency distortion and adjusts the sound to have
stable tones.
A. FOLLOW AUDIO IN 1–4, OFF
Specifies the video channel to interlink by audio follow with audio
input via AUDIO IN.
* This is effective when “AUDIO FOLLOW” is set to “ON.”
A. FOLLOW MIC 1–4, OFF
Specifies the video channel to interlink by audio follow with audio
input via MIC.
* This is effective when “AUDIO FOLLOW” is set to “ON.”
SETUP Menu
(Pressing and holding the [(TAP) BPM] button for 2 seconds or longer)
Menu item Value (bold text: default value) Explanation
BPM 20– 120 –250 Specifies the tempo when the BPM sync function is turned on.
BPM SYNC x1/4, x1/2 , x1, x2
When the BPM sync function is turned on, specifies the multiple of
the BPM value to be used as the speed to switch video.
HDCP ON, OFF
If this is “ON,” copyright-protected (HDCP) video can be input. HDCP
is also added to the video that is output.
OUTPUT CONTRAST -64– 0 –63 Adjusts the contrast of the main output video.
OUTPUT SATURATION -64– 0 –63 Adjusts the color saturation of the main output video.
OUTPUT BRIGHTNESS -64– 0 –63 Adjusts the brightness of the main output video.
OUTPUT COLOR SPACE
AUTO , RGB-FULL, RGB-LIMIT,
YPbPr
Specifies the color space (system for representing colors in video) of
the OUTPUT connector.
OUTPUT DVI-D/HDMI AUTO , DVI-D, HDMI Specifies the type of signal that is output from the OUTPUT connector.
PREVIEW CONTRAST -64– 0 –63 Adjusts the contrast of the preview output video.
PREVIEW SATURATION -64– 0 –63 Adjusts the color saturation of the preview output video.
PREVIEW BRIGHTNESS -64– 0 –63 Adjusts the brightness of the preview output video.
PREVIEW COLOR SPACE
AUTO , RGB-FULL, RGB-LIMIT,
YPbPr
Specifies the color space (system for representing colors in video) of
the PREVIEW connector.
PREVIEW DVI-D/HDMI AUTO , DVI-D, HDMI Specifies the type of signal that is output from the PREVIEW connector.
PREVIEW OUT
Specifies the view mode of preview output.
MULTI-VIEW Displays the incoming video on channels 1–4 as a four-way split screen.
OUTPUT Displays the video currently being output.
PREVIEW Displays the video to be output next.
PinP BORDER 0– 10 –15 Adjusts the width of the border added to the PinP inset screen.
PinP BORDER COLOR
BLACK, WHITE, GRAY, RED , GREEN,
BLUE, YELLOW
Specifies the color of the border added to the PinP inset screen.
AUTO SCAN ON, OFF
Turns the Auto Scan function on/off.
If this is “ON,” channels 1–4 are switched automatically.