BenQ DesignVue PD2705UA 27" 4K HDR Monitor with Ergo Stand - Manual (Page 19)

19
How to assemble your monitor hardware (for
models with stand)
• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. The location and available input and output
jacks may vary depending on the purchased model.
Avoid finger pressure on the screen surface.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a
stapler or a mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or
scraping the monitor around on your desk will scratch or damage the monitor surround and controls.
Open the box, so you can take out the box contents
easily.
Take out the monitor base and stand. You need to
remove the cushion and the foam wrap that protect
the back of the monitor to access the stand arm.
3
4
3
1
2