BenQ DesignVue PD2705UA 27" 4K HDR Monitor with Ergo Stand - Manual (Page 39)

39
Rotating the monitor
1. Pivot the display.
Before rotating the monitor with a portrait viewing orientation, the display has to be rotated 90
degrees.
Right-click the desktop and select
Screen resolution from the popup menu. Select Portrait in
Orientation , and apply the setting.
Depending on the operating system on your PC, different procedures should be followed to adjust the
screen orientation. Refer to the help document of your operating system for details.
2. Fully extend the monitor and tilt it.
Gently lift the display up and extend it to the maximum
extended position. Then tilt the monitor.
The monitor should be vertically extended to allow to rotate
from landscape to portrait mode.
3. Rotate the monitor 90 degrees
clockwise as illustrated.
To avoid the edge of the LCD display hitting the monitor base surface while it is
being rotated, do tilt and extend the monitor to the highest position before you
start to rotate the display. You should also make sure there are no obstacles
around the monitor and there is enough room for cables.
90