BenQ DesignVue PD2705UA 27" 4K HDR Monitor with Ergo Stand - Manual (Page 9)

9
Care and cleaning
• Do not place the monitor face down on the floor or a desk surface directly. Otherwise,
scratches on the panel surface may occur.
• The equipment is to be secured to the building structure before operation.
• (For models that support wall or ceiling mounting)
• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material and the standard wall mount bracket (purchased separately)
are stable enough to support the weight of the monitor.
• Turn off the monitor and the power before disconnecting the cables from the LCD
monitor.
• Always unplug the product from the power outlet before cleaning. Clean the LCD
monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or
glass cleaners.
• Slots and openings on the back or top of the cabinet are for ventilation. They must not
be blocked or covered. Your monitor should never be placed near or over a radiator or
heat sources, or in a built-in installation unless proper ventilation is provided.
• Do not place heavy loads on the monitor to avoid possible personal injury or damage
to the monitor.
• Consider keeping the box and packaging in storage for use in the future when you may
need to transport the monitor.
• Refer to the product label for information on power rating, manufacture date, and
identification markings.
Servicing
• Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltages or other risks. If any of the above mentioned
misuse or other accident such as dropping or mishandling occurs, contact qualified
service personnel for servicing.
• Contact your place of purchase or visit the local website from Support.BenQ.com for
more support.
General warranty information
Note that the monitor warranty may be void if any of the following conditions occurs:
• Documents required for warranty services have been altered by unauthorized use or is
illegible.
• The model number or production number on the product has been altered, deleted,
removed or made illegible.
• Repairs, modifications, or alterations have been made by unauthorized service
organizations or persons.
• Damage caused by improper storage of the monitor (including but not limited to force
majeure, direct exposure to sunlight, water, or fire).
• Reception problems occurred due to external signals (such as antenna, Cable TV)
outside the monitor.
• Defects caused by abuse or misuse of the monitor.
Support.BenQ.com