Emerson Process Management ROSEMOUNT 5300 - Manual (Page 292)

Reference Manual
00809-0100-4530, Rev BA
July 2009
Rosemount 5300 Series
G-2
XD_ERROR 11 A transducer block alarm subcode.
COLLECTION_DIRECTORY 12
INP_SEARCH_START_NBR 13 Search start number for input registers
DB_SEARCH_START_NBR 14 Search start number for holding registers
INP_REG_1_TYPE 15 Register type
INP_REG_1_FLOAT 16 If the register contains a float value, it should be displayed here
INP_REG_1_INT_DEC 17 If the register contains a DWORD value, and dec is chosen,
it should be displayed here
INP_REG_2_TYPE 18 Register type
INP_REG_2_FLOAT 19 If the register contains a float value, it should be displayed here
INP_REG_2_INT_DEC 20 If the register contains a DWORD value, and dec is chosen,
it should be displayed here
INP_REG_3_TYPE 21 Register type
INP_REG_3_FLOAT 22 If the register contains a float value, it should be displayed here
INP_REG_3_INT_DEC 23 If the register contains a DWORD value, and dec is chosen,
it should be displayed here
INP_REG_4_TYPE 24 Register type
INP_REG_4_FLOAT 25 If the register contains a float value, it should be displayed here
INP_REG_4_INT_DEC 26 If the register contains a DWORD value, and dec is chosen,
it should be displayed here
INP_REG_5_TYPE 27 Register type
INP_REG_5_FLOAT 28 If the register contains a float value, it should be displayed here
INP_REG_5_INT_DEC 29 If the register contains a DWORD value, and dec is chosen,
it should be displayed here
INP_REG_6_TYPE 30 Register type
INP_REG_6_FLOAT 31 If the register contains a float value, it should be displayed here
INP_REG_6_INT_DEC 32 If the register contains a DWORD value, and dec is chosen,
it should be displayed here
INP_REG_7_TYPE 33 Register type
INP_REG_7_FLOAT 34 If the register contains a float value, it should be displayed here
INP_REG_7_INT_DEC 35 If the register contains a DWORD value, and dec is chosen,
it should be displayed here
INP_REG_8_TYPE 36 Register type
INP_REG_8_FLOAT 37 If the register contains a float value, it should be displayed here
INP_REG_8_INT_DEC 38 If the register contains a DWORD value, and dec is chosen,
it should be displayed here
INP_REG_9_TYPE 39 Register type
INP_REG_9_FLOAT 40 If the register contains a float value, it should be displayed here
INP_REG_9_INT_DEC 41 If the register contains a DWORD value, and dec is chosen,
it should be displayed here
INP_REG_10_TYPE 42 Register type
INP_REG_10_FLOAT 43 If the register contains a float value, it should be displayed here
INP_REG_10_INT_DEC 44 If the register contains a DWORD value, and dec is chosen,
it should be displayed here
DB_REG_1_TYPE 45 Register type
DB_REG_1_FLOAT 46 If the register contains a float value, it should be displayed here
DB_REG_1_INT_DEC 47 If the register contains a DWORD value, and dec is chosen, it
should be displayed here
DB_REG_2_TYPE 48 Register type
Parameter
Index
Number
Description