Fostex VF160EX - Manual (Page 114)

114
Save/load of Song Data Using a CD-R/RW drive
When saving/loading data using the CD-R/RW drive, program data is saved/loaded as shown be-
low.
• Save
You can only a single selected program data to a disc regardless of the program data amount.
You cannot save more than one program data even if there are enough disc space.
However, you can save a program data to more than one disc if the data amount is larger than a disc space.
You can save almost all necessary information such as song data of all tracks (real and additional tracks)
and mixer scene data.
Trk 1 & 2 & 3 & 4 & 5 & 6 &7
& 8 & 9 & 10 & 11 & 12 & 13
& 14 & 15 & 16 & 17 & 18 &
19 & 20 & 21 & 23 & 24
Program 1 (P01) Program 2 (P02) Program 99 (P01)
Save
Current drive of the VF160EX
• Creating an audio CD
You can make an audio CD by recording sound data of tracks 1 and 2 between the “ CLIPBOARD IN point ”
and “ CLIPBOARD OUT point ” to a CD-RW/CD-R disc.
• Loading an audio CD data
You can load a material on a (commercial or created) audio CD to a program of the VF160EX.
Audio data is loaded to a “
new program ” automatically created by the unit, which is the same way as
backup data loading. The unit never overwrites the existing program.
Trk 1 & 2 & 3 & 4 & 5 & 6 &7
& 8 & 9 & 10 & 11 & 12 & 13
& 14 & 15 & 16 & 17 & 18 &
19 & 20 & 21 & 23 & 24
Program 1 (P01) Program 2 (P02) New Program
Load
Current drive of the VF160EX
• Load
The data loading using a CD-R/RW drive is taken place after a “ new program ” is created in the current drive
(the load destination). You cannot overwrite an existing program with the loaded data.
The newly created program is numbered the next number to the highest existing program number.