Fostex VF160EX - Manual (Page 115)

115
1. After turning on the VF160EX, insert a disc to the CD-R/
RW drive.
2. Press the [SETUP] key of the VF160EX to enter the setup
mode.
The display shows the screen for selecting the setup
menu.
The following description is assumed that a non-recorded CD-R/RW disc is used.
4. While “IDE” flashing, press the [ENTER/YES] key.
Press the [ENTER/YES] key to display the CD-R/RW drive
name, and then changes to the save mode select screen
where "
Bkup " (Backup) flashes.
To save (backup) song data, select “ BkUp ”.
To make an audio CD, select “ CD-DA ” or “ Setup ”.
This procedure describes how to save song data, so we
select “
BkUp ” here.
See “ making an audio CD ” described later for details about
how to make an audio CD.
3. Use the [JOG] dial to select (highlight) “Save PGM” and
press the [ENTER/YES] key.
The display shows the screen for selecting a save device,
where
“IDE” is flashing.
<Note>
Do not carry out any VF160EX key operation until the
access process to the CD-RW/CD-R disc is completed.
Flashing
Saving data using a CD-R/RW drive (Backup)
Flashing
6. After selecting a program, press the [ENTER/YES] key.
The display shows the screen as below.
7. While “B01” is shown, press the [ENTER/YES] key.
The VF160EX starts the save operation. The recorded
space shown on the display is counted down while the
save operation progresses.
It will take some time for saving all data. The following
display example shows that the data of the selected
program number is being saved to the backup number
“B01”.
In the example above, the selected program data will be
saved to a CD-RW/CD-R disc with the backup number
“B01” . The program title is copied to the backup title
(you can not edit it).
By rotating the
[JOG] dial when the above screen is shown,
you can also select “Eject” , besides “B01”.
If you select “Eject” and then press the [ENTER/YES] key,
the disc will be ejected.
Number of discs
By rotating the [JOG] dial, you can select a desired pro-
gram number/title from among available programs in
the VF160EX current drive. The recorded space of the
selected program is also shown.
If you select a program which requires more than one
disc for saving, the display shows the required number
of discs (see the screen example below).
5. While “BkUp” flashing, press the [ENTER/YES] key.
The display shows the screen for selecting a program to
be saved (the program number of the selected program
flashes).
Flashing
Flashing
Recorded
space