Fostex VF160EX - Manual (Page 72)

72
Copy & Paste
Move & Paste
Erase
Track Exchange
PASTE
COPY CLIP
PASTE
MOVE CLIP
CLIPBOARD IN POINT CLIPBOARD OUT POINT
AUTO PUNCH IN POINT
3. Press the [REWIND] key or [F FWD] key to move the
cursor to the point to edit. Then turn the [JOG] dial to
choose the alphanumeric/symbol to input.
The title can contain up to 16 characters form the
following alphanumerics and symbols.
4. Press the [ENTER/YES] key after inputting the title.
The title input is set and the LCD returns to the Normal
Display.
The VF160EX features a 3.5 inch E-IDE hard disk as a storage media. This allows speedy voice editing in a nonlinear
and nondestructive manner in track units. There are four track editing options as described below.
A specific range of data on a voluntary track can be copied
and then pasted to the same track or another track. Note
that the Copy & Paste feature is only possible with the
current program started.
A specific range of data of a voluntary track can be moved
and pasted to the same track or another track. Note that
the Move & Paste feature is only possible with the current
program started.
A specific range of data on a voluntary track or on all real
tracks are erased. Note that the Erase feature is only
possible with the current program started.
Tracks are interchangeable with each other.
Mono tracks or several (2 track or 8 track unit) tracks
are exchangeable, to freely exchange between the 24 real
tracks and additional tracks. Note that the Track
Exchange feature is only possible with the current
program started.
<Precautions>
• DO NOT change the program during the editing
process until the entire editing process is completed,
since the editing process only effects the program
currently selected.
• Note that the editing process other than Track
Exchange is only an option for real tracks (Trk 1-16).
To edit data on additional tracks (Trk 17-24),
exchange it to a real track to execute the editing
process.
Copy & Paste and Move & Paste
Copy & Paste
Copy & Paste refers to the procedure to temporarily copy
to a clipboard (Copy/Clip) a specific range of data on a
voluntary track. That copied data can then be pasted to a
specific paste point on a voluntary track. Since, the data
copied remains in the clipboard even after pasting the
data, that same copied data can be pasted numerous times.
Move & Paste
Move & Paste resembles the Copy & Paste feature and
refers to the procedure to temporarily move to a clipboard
(Move/Clip) a specific range of data on a voluntary track.
The difference between the Move & Paste and Copy & Paste
feature is that with Move & Paste the original data moved
can only be pasted ONCE. At the point the move data is
pasted the data in the clipboard and original data is no
longer available to paste again.
CLIPBOARD IN POINT CLIPBOARD OUT POINT
AUTO PUNCH IN POINT
COPY
SOURCE
TRACK
MOVE
SOURCE
TRACK
PASTE
DESTINATION
TRACK
PASTE
DESTINATION
TRACK
Editing the Track