Fostex VF160EX - Manual (Page 84)

84
When mixdown starts from non-“ABS 0”
1. When the unit stopped, press the [CLIPBOARD IN] key.
The time registered with the [CLIPBOARD IN] key is shown
(in this tutorial, “ ABS 00M 10S 00F 00SF ”), and “ S ” on the
display flashes, showing that you can now edit the
“
second ” field.
• Change the “CLIPBOARD IN point”.
You can make a silence at the beginning of a program
which is not mixed down from “
ABS 0 ” by setting the
“ CLIPBOARD IN point ” appropriately.
In the following description, we assumed that the cur-
rent program is a 5-minute length program which is
mixed down from “
ABS 00M 10S 00F 00SF ”, in which
the [CLIPBOARD IN] and [CLIPBOARD OUT] keys hold
“ 00M 10S 00F 00SF ” and “ 05M 10S 00F 00SF ” respec-
tively, and audio immediately starts from “ 00M 10S
00F 00SF ”.
And you are now going to create a 3-second silent
space at the beginning of the song.
9. When the unit is stopped, press the [F FWD] key while
holding down the [STOP] key.
The unit immediately locates the “ REC END point ”.
10. Press the [STORE] key followed by the [CLIPBOARD
OUT] key.
The “ REC END point ” is now registered as the “ CLIPBOARD
OUT point ”.
The display returns to the Normal display.
By changing the “ CLIPBOARD OUT point ”, you can now cre-
ate an audio CD without loosing the last part.
• Change the “CLIPBOARD OUT point”.
2. While “S” flashes, enter “07” using the [JOG] dial.
3. Press the [STORE] key followed by the [CLIPBOARD IN]
key.
“ 00M 07S 00F 00SF ” is registered with the “ CLIPBOARD IN
point ”.
Now you made a 3-second silent space at the beginning
of the song by changing the “
CLIPBOARD IN point ”.
See “ Making an audio CD ” in “ Save/load using CD-RW/CD-R ”
described later for details about how to make an audio CD
from the mixed-down song.
Flashing