Fostex VF160EX - Manual (Page 144)

144
1. Select “Drive Information” in the menu selection display
and press the [ENTER/YES] key.
It will change to the "Drive Information" second level and
the current drive information currently in use will be
displayed (The symbol indicates there is data below).
2. As the [JOG] dial is rotated, information will be displayed
one by one.
3. Press the [EXIT/NO] key (or [STOP] key) to exit from the
SETUP mode.
Format information of the current drive currently installed can be checked by using the “Drive Format Information”
menu. Should any trouble occur in the VF160EX, providing the information obtained here to our nearest Fostex
Service Station will be of great help in giving quick service.
The following items will be displayed and can be confirmed.
1. Manufacture / Model of the currently installed hard
disk.
2. Format method
3. Format type
4. Simultaneously recordable number of tracks
5. Number of bits at formatting
6. Sampling frequency at formatting
7. Present number of programs
8. Present number of free blocks
9. Audio file / maximum number of events and its
program No.
10. Specific capacity of the drive
11. Remaining capacity of the drive
12. Present software version
The Drive Format Information [“Drive Information”]
2. Select the desired item with the [JOG] dial and press the
[ENTER/YES] key.
The selected item will be set.
Whether the fader manipulation should be reflected on the sound volume or not can be set.
The setup content will be held even if the main power is switched off.
1. Select “Fader Fix” in the menu selection display and press
the [ENTER/YES] key.
The currently set will flash. “ Off ” will flash in the initial
setting.
On For all modes, manipulation of the
Channel fader/Master fader will
have not affect on the sound volume.
Any accidental shifting of the fader
position by vibration and
misoperation can be prevented.
Off (Initial setting) Manipulation of the Channel fader/
Master fader will affect the sound
volume.
3. Press the [EXIT/NO] key (or [STOP] key) to exit from the
SETUP mode.
• Initial setting: “Off”
• Options: “On” or “Off”
* You can set the value for each Program individually.
* The settings can be saved and loaded as part of the
song data.
* The settings are maintained after you turn off the
power to the VF160EX.
Flashing
<Caution>
The “Fader Fix Mode” can be made to function when set
in other (CH, MST or CH & MST) than “Off” of the next
item on the “Fader Recall Mode”.
Fader Fix Mode Setting [“Fader Fix”]