Test - invoke test tool, Test, Invoke test tool -78 – GE 68K System User Manual

Page 104

Advertising
background image

GE Energy Services

68K System Monitor

User's Guide

SWM0023 1.00 2

General

3-78

Full Release

TEST - Invoke Test Tool

Platform

o

CPM

o

D20
D20 Base

o

D20 ME
D20 Base

o

D20/200
CCU Base

þ

D20/200 ME
CCU Base

þ

D25

Description

Use this command to activate a test tool external to the monitor.

To use a test tool, the test tool application must:
• be included in the software for the system, and
• be created specifically to make use of this monitor function.
The 68K Monitor relinquishes communications control to the test tool and waits for
the tool to complete its processing before continuing.

Syntax

Below is usage and syntax information for this command

Command Format

test proc_name

Variables

None

Parameters

proc_name

= The name of the test tool process, normally
Txxx.

Example

None Required

Special
Considerations

If the test tool application is suspended, the command will not
function.

The monitor must detect that the test tool is waiting for a signal
before it will proceed.

Advertising