Img - display image information, Display image information -41 – GE 68K System User Manual

Page 67

Advertising
background image

68K System Monitor
User's Guide

GE Energy Services

General

SWM0023-1.00 -2

Full Release

3-41

IMG - Display Image Information

Platform

o

CPM

o

D20
D20 Base

þ

D20 ME
D20 Base

o

D20/200
CCU Base

þ

D20/200 ME
CCU Base

þ

D25

Description

Use this command to display information on the BootROM, FLASH, and NVRAM
configuration images.

The information consists of:

For the BootROM and FLASH images, a description string and a part number;

For the NVRAM configuration, the static CRC and configuration version.

Note:

If any of this information is not available, the monitor will display a
message indicating this in place of the expected information.

Because the IMG command only displays information entered into the
MODULE.MAK file used in the SDS system, any omissions or mistakes in
the MAK file will be reflected in the output of this command.

Syntax

Below is usage and syntax information for this command

Command Format

img

Variables

None

Parameters

None

Example

Type img and press

ENTER

.

Results: The monitor displays information on the FLASH,

BootROM, and configuration images currently
active in the system.

Special
Considerations

None

Advertising