GE 68K System - Manual (Page 107)

68K System Monitor
User's Guide
GE Energy Services
General SWM0023-1.00 -2
Full Release 3-81
UL - Upload
Platform þ CPM þ D20
D20 Base þ D20 ME
D20 Base o D20/200
CCU Base þ D20/200 ME
CCU Base þ D25
Description Use this command to retrieve an S-record from the device’s memory.
Syntax Below is usage and syntax information for this command
Command Format CPM / D20: ul
CCU / CCU ME / D25: ul beg_addr end_addr [width]
Variables None
Parameters beg_addr = start of address range
end_addr = end of address range
Example Type ul and press ENTER .
Results: uploads the contents of NVRAM to the terminal, and
returns to the prompt when completed.
Special
Considerations None