GE 68K System - Manual (Page 37)

68K System Monitor
User's Guide
GE Energy Services
General SWM0023-1.00 -2
Full Release 3-11
CCA - Change Configuration File Attributes
Platform o CPM o D20
D20 Base o D20 ME
D20 Base þ D20/200
CCU Base þ D20/200 ME
CCU Base þ D25
Description Use this command to modify the configuration file attributes for a given
configuration file.
Overwrites the old attributes with the new attributes.
Syntax Below is usage and syntax information for this command
Command Format cca file_num
Variables None
Parameters file_num = The query configuration storage parameters
command displays all existing files, giving each
a numerical index. Use this index with this
command to specify the affected file.
Example Type cca 1 and press ENTER .
see below
Special
Considerations When this command is invoked, the user is provided with the
current attributes of the file using the characters:
• ‘c’ (currently selected file)
• ‘o’ (opened), and
• ‘r’ (corrupt).
The user is expected to enter the attributes to change by typing
the character representing the attribute (‘c’, ‘o’, or ‘r’) followed
by ‘+’ to add it or ‘-‘ to remove it.
The same command can change any of the attributes. You can
enter the same attribute multiple times, but only the last entry
will take effect. You can separate each attribute by a space, but
do no separate the attribute and its add/subtract character, and
any other characters on the command line will result in an
error.