GE 68K System - Manual (Page 50)

GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-24 Full Release
DHW - Display Hardware Data
Platform o CPM o D20
D20 Base o D20 ME
D20 Base o D20/200
CCU Base o D20/200 ME
CCU Base þ D25
Description Use this command to display information on the hardware configuration of the D25.
The provided information consists of:
• size and base address of all memory regions
• DSP and XCOM type
• state of the auxiliary output and sysfail signal, and
• EPLD and PCB revision numbers.
Syntax Below is usage and syntax information for this command
Command Format dhw
Variables None
Parameters None
Example Type dhw and press ENTER
Results: A comprehensive list of hardware and memory
information is displayed.
Special
Considerations None