GE 68K System - Manual (Page 51)

68K System Monitor
User's Guide
GE Energy Services
General SWM0023-1.00 -2
Full Release 3-25
DIR - Directory
Platform o CPM o D20
D20 Base o D20 ME
D20 Base þ D20/200
CCU Base þ D20/200 ME
CCU Base þ D25
Description Use this command to display a directory of the database tables residing in a specified
memory type. Database table information consists of:
name - table name
address - the absolute table memory address
records - the number of valid records in the table
record size - the size, in bytes of each record
Syntax Below is usage and syntax information for this command
Command Format D25: dir [/(n | p)]
CCU / CCUME: dir [/(l | g | e)]
Variables /l = local NVRAM database tables (default)
/g = global NVRAM database tables
/e = EPROM/Flash default configuration database
tables
/n = D25 NVRAM
/p = D25 Flash
Parameters None
Example Type dir /n and press ENTER .
Results: The monitor displays the above information for all
NVRAM database tables.
At the end of every full screen, the monitor prompts
“--More--”
, and will continue when any key is
pressed.
Continued on next page