GE 68K System - Manual (Page 62)

GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-36 Full Release
EXIT - Exit
Platform þ CPM þ D20
D20 Base þ D20 ME
D20 Base þ D20/200
CCU Base þ D20/200 ME
CCU Base þ D25
Description Use this command to perform a limited clean up of the 68K Monitor, and return to
the calling routine (such as WESMAINT) if it has not been suspended.
Syntax Below is usage and syntax information for this command
Command Format exit
Variables None
Parameters None
Example Type exit and press ENTER .
Results: The monitor returns control to the calling routine.
Special
Considerations The task that started the 68K Monitor must still exist and be
running (i.e. not suspended).
This command automatically clears all active breakpoints but
does not perform any other clean-up operations. This means
that if you enable debug mode, if something has suspended
processes, or any other system alterations made, they will
remain in effect even after exiting the monitor.