GE 68K System - Manual (Page 77)

68K System Monitor
User's Guide
GE Energy Services
General SWM0023-1.00 -2
Full Release 3-51
QP - Query Process
Platform þ CPM þ D20
D20 Base þ D20 ME
D20 Base þ D20/200
CCU Base þ D20/200 ME
CCU Base þ D25
Description Use this command to display the:
• general status of all currently active processes
• general status of specific processes, or
• detailed information about one currently active process.
Syntax Below is usage and syntax information for this command
Command Format CPM / D20 / D25: qp [(pid | name)]
CCU / CCUME: qp [(pid | gpid | name)]
Variables None
Parameters (none) = display general status information for all
processes.
pid = pSOS process ID (in hexadecimal); display
detailed information for a specific process.
gpid = global pSOS process ID (in hexadecimal);
display detailed information for a specific
process.
name = case-sensitive process name. Supports the new
process naming convention. To display an entire
name, enter detailed information for that process.
If you enter the first few characters, the
command attempts pattern matching. The
monitor displays general or detailed information
depending on the number of matches.
Example Type qp and press ENTER .
Results: The system displays process information about all
active processes, and then returns to the prompt.
Continued on next page