GE 68K System - Manual (Page 78)

GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-52 Full Release
QP - Query Process, Continued
Syntax (continued)
Special
Considerations All numeric data displayed is in hexadecimal notation.
Information
Details The response to all QP commands will include:
• process name
• process ID
• group ID
• priority
• current run state
The response to QP commands that specify processes will include:
• received signals
• time slice
• run ticks
• run count
• owned memory segments
• register values at the time of the last swap
Current Run
State This table lists the states that the processes may be in at any time:
In this state… the process…
Await is spawned but not activated.
Vwait is waiting for a pSOS signal.
Xwait is waiting for a message from another process to arrive at an
exchange.
Paused has sent a ‘pause’ request to processor.
Suspended has been spawned and activated, but is not running.
• This state may be a normal condition, or may indicate a
fatal configuration or system error. Check the
WESMAINT Logger to verify.
Multi-Processor
Displays For a multi-processor system, this command displays:
• a specific global process' summary consisting of its node and local pid, or
• the process summary of all local processes to the node, and all global processes
in the system.