GE 68K System - Manual (Page 108)

GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-82 Full Release
VER - Version
Platform þ CPM þ D20
D20 Base þ D20 ME
D20 Base þ D20/200
CCU Base þ D20/200 ME
CCU Base þ D25
Description Use this command to display the Base System and pSOS versions, plus any
application version and embedded image information. On the D25, the monitor will
also display the BootROM version.
The provided information consists of:
name - application or embedded image name
version - image version number
level - image compilation level
target - hardware target (i.e., D20M++, D25, D25_FF)
date - image compilation date and time
Syntax Below is usage and syntax information for this command
Command Format D20 / CCU / CCU ME: ver
D25: ver [/d]
Variables /d Display DSP flash versions
Parameters None
Example Type ver and press ENTER .
Results: The monitor displays at least the boot code and pSOS
version information and returns to the prompt.
Special
Considerations None