GE 68K System - Manual (Page 88)

GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-62 Full Release
RTC - Test CCU RTC
Platform o CPM o D20
D20 Base o D20 ME
D20 Base o D20/200
CCU Base o D20/200 ME
CCU Base o D25
Description Use this command to test the RTC synchronization between nodes in a D200.
Syntax Below is usage and syntax information for this command
Command Format rtc [/r]
Variables /r = reset back to initial settings
Parameters None
Example At the monitor prompt, type rtc /r and press ENTER .
Special
Considerations None