GE 68K System - Manual (Page 57)

68K System Monitor
User's Guide
GE Energy Services
General SWM0023-1.00 -2
Full Release 3-31
E - Edit Memory, Continued
Syntax (continued)
Parameters address = address to edit in hexadecimal notation
Example Type e /l 200000 and press ENTER .
This indicates that you are editing RAM memory, starting at
address 200000 hexadecimal in long word format.
Results: The system continues to display the current address
location and data at that location in hexadecimal
format, until you use a period (.) to return the monitor
prompt.
Special
Considerations
• An attempt to display non-existent memory or modify
EPROM memory results in a bus error.
• You may modify systems with FLASH EPROM such as
the D25 and CCUME using this command.